Messages

1

Mitel MiVoice Business/MCD/3300 / Re: 3300 MXE III

« on: March 12, 2025, 03:09:35 AM »

hi johnp,

Thank you for reply, we bought a new hdd with software on it and the system working properly.

Thanks a lot for your help


sadic

2

Mitel MiVoice Business/MCD/3300 / 3300 MXE III

« on: March 10, 2025, 09:43:35 PM »

Dear Everyone,

I have a problem with my Mitel it won't boot. Here is the capture of booting sequence.
Is there any way to solve this issue.

Your reply is really appreciated.

Thank you.

sadic

3

Mitel MiVoice Business/MCD/3300 / Re: SIP TRUNK

« on: September 27, 2024, 04:42:37 AM »

Thank you for all your reply, my issue was resolved. The cause of problem is from TELCO vendor.


Thank you very much for your support.


Sadic

4

Mitel MiVoice Business/MCD/3300 / Re: SIP TRUNK

« on: September 18, 2024, 08:51:07 AM »

hi ralph,

its show invalid on the screen of ip phone and fast busy for analog

5

Mitel MiVoice Business/MCD/3300 / SIP TRUNK

« on: September 17, 2024, 06:58:50 AM »

Hello Everyone,

I have a problem with my 3300 Mxe version 43.0.1.16 ICP for sip trunk. I have an incoming call, but I can't dial for outgoing. Can you pls tell me what is the possible cause issue

I really appreciated for your reply.

Thanks,

Sadic

6

Mitel SX200, SX2000, and older SX platforms / Re: SX-200 EL

« on: February 14, 2024, 03:22:18 AM »

Thanks Acejavelin

7

Mitel SX200, SX2000, and older SX platforms / SX-200 EL

« on: February 13, 2024, 03:55:39 AM »

Dear all,

I have a sx-200 EL LW19, is there a possible to increase the user devices from 192 to 336. Any idea

I really appreciated your response.

Sadic

8

Mitel MiVoice Business/MCD/3300 / Re: AX Controller ICP

« on: August 24, 2023, 02:17:22 AM »

Thank you for the reply acejavelin. I will try it

9

Mitel MiVoice Business/MCD/3300 / AX Controller ICP

« on: August 19, 2023, 06:06:09 AM »

Good day Everyone,

I have a problem with the AX controller ICP working software 38.0.8.10 that when it shuts down and comes back up, it doesn't read the other card installed but its program still exists. There is also a time when the system is powered off and shutdown, once it is up it returns to the correct installed card. What is the solution for this issue? The system is eighteen years old.


I really appreciated for your response.

Thanks

10

Mitel MiVoice Business/MCD/3300 / Re: AX Controller IP Address

« on: February 18, 2022, 02:55:59 AM »

Thanks everyone I will try to read the technician handbook.

11

Mitel MiVoice Business/MCD/3300 / AX Controller IP Address

« on: February 15, 2022, 07:57:12 AM »

Hello Everyone,

Can anyone tell me how to change the ip address of the system 3300 Ax Controller. The present system server IP Addrerss is 192.168.1.2 and the client want to change this to 192.168.1.3.

I really appreciate your reply on this.

Thanks.

12

Mitel MiVoice Business/MCD/3300 / Re: Certificate Error

« on: June 01, 2020, 02:58:31 AM »

Thank you again Lundah is working now

13

Mitel MiVoice Business/MCD/3300 / Re: Certificate Error

« on: May 30, 2020, 01:40:41 AM »

Thank you lundah, I will try that then I let you know.


Thank you again

14

Mitel MiVoice Business/MCD/3300 / Certificate Error

« on: May 29, 2020, 04:15:14 AM »

Hello Guys,

I cannot access this AX Controller using IE or FF and it shows "You can access this using 6.0 or higher" which I'm using IE version 11 and it shows Certificate error. I checked the Certificate and is valid until 2029. Here is the screen shot of the Certificate:

Your reply is really appreciated.

Thanks

15

Mitel SX200, SX2000, and older SX platforms / Re: Sx-200 El/Ml ICP

« on: February 02, 2020, 09:37:14 PM »

Thank you acejavelin