Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - misbah1981

Pages: [1]
1
Mitel MiVoice Business/MCD/3300 / Mitel Deplyment Profile
« on: July 25, 2019, 06:49:26 AM »
HI All,

facing issue with Micollab Deployment profile  when connect to MBHs put the Host name its shows below error
Could not connect to MBG: [Errno -2] Name or service not known

please any one advise me how solve this

2
Many Thanks for reply
All respective firewall ports has been already open
can you tell me about MBG what will i chck on MBG
its LAN mode network profile.

Thanks in advance

3
HI having issue No voice in Mitel Micollab softphone when calling through internet call establish but no voice internally on local LAN its working perfect
can any body tell me the reason

Thanks in Advance

4
Hi All having issue Mitel one extension not shown in user and devices TAB extension working fine  also shows in Multi line key appearances  how it come on user and devices TAb kindly guide me

5
Mitel MiVoice Business/MCD/3300 / Mitel UC 360 Not register
« on: May 15, 2019, 01:41:01 AM »
HI All
 am facing issue after deploy Mitel Micollab client any other third party sip phone not register to Mitel 3300 even UC360 also not register
can any one help me how it problem solve and what cause.

Thanks in Advance

6
Mitel MiVoice Business/MCD/3300 / Mitel UC360 Not Register
« on: April 24, 2019, 04:24:12 AM »
HI All i have  one Mitel UC360 tray to register with Mitel 3300 not register
its shows error TLS error actually having also MBG and Micollab Client can any body knows how i resolve.

Thanks in Advance

7
HI wants to Configure call History in Mivoice Bussiness Console kindly send me the procedure and database software where i can download

8
Mitel MiVoice Business/MCD/3300 / Mitel Interconnect
« on: September 20, 2018, 04:26:34 AM »
HI
 can any one tell me how can make interconnect  btween two PRi means
same controller having Two PRI  10 extension take one PRI and other 10 Take Other PRI means two Office Run on same Controller two Seperate PRI

9
Mitel MiVoice Business/MCD/3300 / Mitel Suites
« on: September 03, 2018, 05:23:56 AM »
Hi All,

 wnats to make suites in hotel option when suits is busy so all extension under suits shows busy how will make one busy all busy
thanks in advance

10
Mitel MiVoice Business/MCD/3300 / CC Unavailable
« on: August 13, 2018, 02:09:43 AM »
Hi All,

Am facing cc Unavailable in Mitel 3300 MXE can any body guide me how remove this error

11
Mitel MiVoice Business/MCD/3300 / Mitel Intercept
« on: July 05, 2018, 04:06:36 AM »
HI All,

facing issue with Mitel Intercept handing please can any one tell me the the procedure how configure below
when off hock the phone no body dial within 15 second call goes automatic to operator.
please guide me

Thanks in Advance

12
Mitel MiVoice Business/MCD/3300 / Re: Routing "0" to operator.
« on: July 05, 2018, 03:45:03 AM »
HI All,

facing issue with Mitel Intercept handing please can any one tell me the the procedure how configure below
when off hock the phone no body dial within 15 second call goes automatic to operator.
please guide me

Thanks in Advance

13
Mitel MiVoice Business/MCD/3300 / Re: How Put Restriction On Mitel
« on: November 26, 2015, 02:34:00 AM »
Many Thanks Yes already have restriction
any idea how can do

14
Mitel MiVoice Business/MCD/3300 / How Put Restriction On Mitel
« on: November 26, 2015, 01:19:56 AM »
Dear All,

I have Mitel 3300 with access code 9 for taking PRI almost 200 Extension
i add new 25 IP extension but wants to take acess code 6 and taking CO Line
9 access code restricted for these new 25 extension
can any body tell me how its happen
Thank in Advance

Regards,
Misbah

15
Mitel MiVoice Business/MCD/3300 / Changing Access Code
« on: November 26, 2015, 01:08:50 AM »
HI All,
 i have access code 9 for Taking PRI Lines extension around 200
customer add 25 more IP extension but these new extention Not Pick Line from 9
they want to add new access code let say 6 and take CO Lines Not Pri Lines
can any body help me regarding on this

Misbah

Pages: [1]