Show Posts
1
Mitel MiVoice Business/MCD/3300 / Cant get two ICP 3300 to communicate after reboot
« on: March 28, 2015, 03:03:30 PM »
I have two ICP3300 that were connected via a site to site VPN. These were communcating fine and calls were being routed.
After rebooting one of the systems we cannot get them to establish a connection.
We can PING and TRACERT successfully between both systems but the RMESS VERIFY PBX LAN command from both sides fail with
a "Open Timeout", "Failed to connect to PBX number".
We can also telnet, telnet to port 1066 and port 1067 using laptops from both networks that the PBXs are on.
I am at wits end as to what could be causing the two systems to communicate. The IP trunk settings seem fine.
Would appreciate any help or suggestions. Thanks.
After rebooting one of the systems we cannot get them to establish a connection.
We can PING and TRACERT successfully between both systems but the RMESS VERIFY PBX LAN command from both sides fail with
a "Open Timeout", "Failed to connect to PBX number".
We can also telnet, telnet to port 1066 and port 1067 using laptops from both networks that the PBXs are on.
I am at wits end as to what could be causing the two systems to communicate. The IP trunk settings seem fine.
Would appreciate any help or suggestions. Thanks.