1
Mitel MiVoice Business/MCD/3300 / Re: Pulse Dialling via P2T Adapter
« on: August 11, 2014, 03:19:38 AM »
Thanks for the suggestion. I've updated the 'Part of a Modem' and will give it a go.
Cheers,
Cheers,
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Mitel MiVoice Business/MCD/3300 / Pulse Dialling via P2T Adapter
« on: August 08, 2014, 08:17:55 AM »
Hi All,
We've recently installed two new 3300's with 4 ASU's each which will all be used with Modems. We have a need to configure a couple of extensions with Pulse Dialling as the modem is an old POS. When we were down in Mitel's labs we didnt test this modem, but they did suggest a Pulse 2 Tone adapter has been seen to work and we have ordered some of these.
When I plug in a test handset and set this to Pulse dialling, it will dial my mobile / cell OK, but the modem wont dial out and I'm wondering if there is anything anywhere in the system that needs to be tweaked. I've looked at pulling pauses into a system speed call but am yet to test this.
Just wondering if anyoen else has any thoughts they could share? I'm not a Mitel guru, i'm an end user who's had to learn this through necessity, so please bear with me if something doesnt immediately click.
Cheers,
Steve
We've recently installed two new 3300's with 4 ASU's each which will all be used with Modems. We have a need to configure a couple of extensions with Pulse Dialling as the modem is an old POS. When we were down in Mitel's labs we didnt test this modem, but they did suggest a Pulse 2 Tone adapter has been seen to work and we have ordered some of these.
When I plug in a test handset and set this to Pulse dialling, it will dial my mobile / cell OK, but the modem wont dial out and I'm wondering if there is anything anywhere in the system that needs to be tweaked. I've looked at pulling pauses into a system speed call but am yet to test this.
Just wondering if anyoen else has any thoughts they could share? I'm not a Mitel guru, i'm an end user who's had to learn this through necessity, so please bear with me if something doesnt immediately click.
Cheers,
Steve
Pages: [1]