Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jonathan

Pages: [1]
1
Mitel MiVoice Business/MCD/3300 / Re: 3300 Sip adapters
« on: October 03, 2010, 11:18:22 PM »
Your question appears to be missing a word or two. Please re-state the question, as it does not appear to make sense as it is presently written.

2
Hadn't thought about ring voltage. That makes perfect sense, though. But if you're using the adapter for outbound dialing only, then you don't need ring voltage...

3
I have a 3300 Cxi controller that has been running just fine since March 19th of this year, running Software Version 7.0.21.7, with Call Control Relink: 37.0.9.14_SP1.

This past Saturday morning @ 9:11am, a bunch of phones, connected to two different Cisco 3560 switches quit working. I received a trouble call of "no dial tone, can't call out", which is how I knew about it. When connected into the PBX, I discovered that a bunch of phones were listed as "Out of Service".

I shut down the PoE ports on the Cisco switches, the phones rebooted, and they all came back up.

What would cause this?

FYI, Cisco 3560 version is "Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(46)SE". We've been running rock solid on this IOS for possibly over a year.

Thanks,

Jonathan

4
What is everyone here using for wall mounting plates for 5200 and 5300 series phones? I put in some Allen Tel wall mount jacks, and while the phone will physically fit on those brackets, the phone is wobbly. Also, the 5304 won't work on that bracket because the keystone jack is not flush with the surface of the plate...

How can I get the phone to stop wobbling? Is there a different kind of plate that will accept an RJ-45 keystone jack (AMP or Allet Tel) that will work better?

Thanks!

Jonathan

5
Anyone know of an ATA that will run off of a Cisco 3560 or 3750 PoE port without an external power supply? Grandstream's units all require an external power supply...

Thanks,

Jonathan
Mitel 3300 ICP running 4.0

Edited July-15-2012: See the store for more on GrandStream's analog adapter

Pages: [1]