Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - thomasuk

Pages: [1]
1
Non-Mitel Chatter / Re: 5220 Hold problems
« on: February 13, 2014, 03:32:04 PM »
PROBLEM SOLVED!

Thanks all for your help. It turned out to be the NAT blocking the parking of the call. When Static NAT traversal was enabled all works fine!

It's strange as I put the phone in a DMZ and reduced NAT to the bare minimum on the router, but thats by the by as it's now fixed

Thanks all!

2
Non-Mitel Chatter / Re: 5220 Hold problems
« on: February 13, 2014, 12:47:13 PM »
Update:

Managed to download a copy of MCD v11, around 700Mb. Tried to install, but only extracts a load of .tar file and other non-Windows files

I presume this is to be uploaded to some kind of phone server and not the thing I'm looking for.

I hope I'm not being incredibly stupid here, but operating in SIP mode. I should just be able to input my providers' server details/user/password etc and have a phone working without resorting to some PABX server or other phone related server stuff.

2 phones are on site, 2 are off site.

Thanks

3
Non-Mitel Chatter / Re: 5220 Hold problems
« on: February 13, 2014, 12:04:48 PM »
Hi jrg0852,

Thanks for the reply.

Is this within the MCD software or via the web interface.

I tried accessing MCD, but dont have any login details/don't really know how to get hold of it

Cheers

4
Non-Mitel Chatter / Re: 5220 Hold problems
« on: February 13, 2014, 10:45:33 AM »
Thanks for the reply.

I have emailed back with some phone calls for tracing, and phoned - still awaiting a response on that one.

I found some setting in an iOS VOIP app, which works with the service including hold etc. Underlined is the one it is set at

Hold Method: INVITE / UPDATE

Hold Direction Mode: NO CHANGE / RFC3264 / INACTIVE / REMOTE HOLD STATUS

Hold Address Mode: NO CHANGE / 0.0.0.0

Resume Direction Mode: NO CHANGE / RFC3264 / REMOTE HOLD STATUS

Is there anyway of accessing similar options on the Mitel Web Interface. Im logging onto the IP of the phone with the Admin login, but find nothing of the sort


Thanks

5
Non-Mitel Chatter / 5220 Hold problems
« on: February 12, 2014, 06:25:27 PM »
Hi all.

I have a few Mitel 5220s running in SIP mode connected to our provider directly (Soho66.co.uk). The problem we have is the HOLD and TRANSFER feature does not work on incoming calls.

On outgoing calls, we can press HOLD and the phone is put on hold, music is played, call can be transferred etc. However when HOLD is pressed on an incoming call, the Line 1 light flashes amber as it should, however the call remains connected. I can hear the caller and they can hear me.

I tried contacting the phone company - standard we do not offer support on this model etc.  The seller that sold me the phones is none the wiser.

I've tried everything I can think of and after 5 days am really starting to dislike these phones  ;)

I thought this maybe due to codec incompatibilities, however I am using G711Alaw only. I've tried changing the "Long SIP-Contact(RFC3840)" to ENABLED, but everytime I save and reboot the phone it defaults back to DISABLED (Also does this with the local tone code, not remembering GB and going back to US)

I've tried using Chrome/IE10 on compatibility mode but cannot get it to enable....


Any help at all or a point in the right direction would be greatly appreciated.

Thanks

Pages: [1]