Messages

1

Mitel MiVoice Business/MCD/3300 / Re: how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: November 16, 2013, 08:33:37 AM »

hi
please help me
thanks a lot

2

Mitel MiVoice Business/MCD/3300 / Re: how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: October 17, 2013, 03:45:19 AM »

I suspect you have no acces rights to do this in the GUI?
Ask your system admin to change this for you

I'm admin
I need to do it automatically changes
After a certain period so that calls voip services, a number that is automatically changed

3

Mitel MiVoice Business/MCD/3300 / Re: how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: October 14, 2013, 12:57:52 AM »

How does CCM achieve changes, could the OP program using MiXML?

I don't know the answer to this.   Are you talking about OPSMan?   I think OPS and Telnet both quit working at 4.2

saeid4462, what version of Mitel are you running?

Ralph

Device version is on my Mitel 3300 MXe
I could get by without using the graphical user interface in a certain configuration changes to the Class of Restriction( "Station Attributes" or "User and Device Attributes" ) with Command and use this in my self programming.
Cisco switch configuration commands in a command like.
who To change telephone attributes with command and use it is in my self programming
Is there any way?

4

Mitel MiVoice Business/MCD/3300 / Re: how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: October 12, 2013, 11:56:54 PM »

Port 2002 is a maintenance port.  It doesn't allow any programming (that we know of.)

Generally speaking you must do all of your programming via the web interface.

I suppose that somewhere deep in the system there are scripts that you may be able to interface with via port 2002 but we have never been made aware of it.  There isn't an API available.

Older software would allow you to telnet to the system so if you have old software then you may be able to write a script for telnet.   The newer software has disabled that.

What are you trying to accomplish?  Maybe there is another way to do what you're looking for.

Ralph

hi
I'd like a voip number e.g. 2222 when in one month more than 10 hours mobile contact service with the other changes to the State where the other fails to dial mobile month.
(change Class of Restriction in "Station Attributes" or "User and Device Attributes" ) And the next available return to automatic mode again before this cycle continue.
I can do and the amount of processing the smdr log for bring the conversation but to change the Web interface should I use service and this will be done manually.
But I'm going to do this automatically, and when a specific interval of a conversation about higher service change.
Something similar to the accounting program
Such as bandwidth on isa
Thank you very much

5

Mitel MiVoice Business/MCD/3300 / Re: how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: October 12, 2013, 12:05:12 AM »

 
So what is port 2002?
Through this port to send commands to a remote machine!?
I need to change the  Class of Restriction( "Station Attributes" or "User and Device Attributes" ) to do it.
I need to change it through programming(my application) without use mitel GUI
Something like acconting
Is there a way to do this
Please help me
thanks

6

Mitel MiVoice Business/MCD/3300 / how to change Class of Restriction For Number Voip in Mitel 3300 MXe

« on: October 10, 2013, 01:20:55 AM »

Hello Friend
I need to change the  Class of Restriction( "Station Attributes" or "User and Device Attributes" ) to do it via the command line
Please help me
thanks