Messages

1

Mitel Software Applications / Re: MBG not accepting withheld/anonymous calls

« on: November 01, 2016, 04:57:53 AM »

Thanks Markyb73,

Adding the MBG address sorted it, much appreciated.

Thanks

T2k

2

Mitel Software Applications / Re: MBG not accepting withheld/anonymous calls

« on: October 31, 2016, 11:44:44 AM »

https://dl.dropboxusercontent.com/u/21226498/Weldmar/out1.pcap

Hi Navarre,

Attached should be a working call then the same call with 141 infront and the call fails

3

Mitel Software Applications / Re: MBG not accepting withheld/anonymous calls

« on: October 25, 2016, 10:24:59 AM »

Hi Navarre,

Thanks for the reply. I'm Mitel 5000 trained but not MBG so wasn't sure if Mitel support would help, no harm in creating a support call I guess.

I have a wireshark capture from the SIP provider but not sure how to upload it! The MBG is at 9.3.0.17

4

Mitel Software Applications / MBG not accepting withheld/anonymous calls

« on: October 25, 2016, 09:13:26 AM »

Hi All,

I have an MBG with teleworkers and SIP trunks connecting through to a Mitel 5000 v6. All works fine apart from withheld calls on the SIP trunks are not connecting.

I can make a call through to a teleworker on the MBG via a SIP trunk on the MBG and the call works fine, do the exact same call with 141 in front and the call doesn't connect.

I am new to the MBG and I expect this is where the problem lies, I have set up a rule on the MBG which is - Request URI - * - Primary - Mitel 5000

Any help would be greatly appreciated.

Thanks

5

MiVoice Office 250/Mitel 5000 / Re: Mitel 5000 - No speech on voicemail - Normal calls are fine

« on: August 23, 2016, 11:46:17 AM »

Hi Ryskie,

Did you ever get a solution to this problem as I am experiencing that exact same issue at a customer site. My next though was to upgrade to the latest SP as suggested by Mitel.