Messages

1

SIP On Mitel / Re: 5330 Handsets and SIP configuration

« on: April 03, 2013, 09:29:11 AM »

Hi cmeilleur,

Thanks for the speedy reply. Yes I do get the basic web ui page. I am working on a Mac however and the firmware file mentioned earlier in the thread downloads as a .exe file which I can't use on a Mac. I had hoped that since the firmware on the phone already seems to be an up to date version I might not need it.

Mitel 5312/5324 SIP Firmware - http://www.4shared.com/zip/2vT43v9g/MitelSIP_IP5312_24_2111.html
Mitel 5330/5340 SIP Firmware - http://www.4shared.com/zip/_O9c55Fh/MitelSIP_IP5330_40_16013.html

I am using Tftpserver.app for the Mac to run a TFTP server and that all seems to be running happily.

Do you have the file in the format that I need to install to the phone? Then I can place it in the TFTP server.

Thanks again for your swift reply.

Angus

2

SIP On Mitel / Re: 5330 Handsets and SIP configuration

« on: April 03, 2013, 08:52:21 AM »

I guys, I wonder if you can help me too?

I recently moved abroad and was given a Mitel 5312 to try and setup with my UK Sipgate account. I'm new to VOIP and SIP setup and after hours of google searching and reading forums, I'm still struggling.

My main question is, can a single Mitel phones be setup to work with a standard cable router, connected to my domestic cable broadband account?

The phone I have has firmware version R8.0.05.00.00.18. I can set it to SIP format by configuring it at boot up, but, like most people I have read about, I'm struggling to get the web configuration working to actually setup my account information.

Any suggestions would be gratefully received.

Many thanks,

Angus