Messages

1

Mitel MiVoice Business/MCD/3300 / Serving Teleworker IP via DHCP

« on: April 25, 2013, 09:27:46 PM »

Trying to keep manual configuration to a minimum as we are a small staff; is there a DHCP option that we can set on our DHCP server that will provide a telworker IP to connected devices?

Much similar to the 128/129/130 options for configuring TFTP/ICP server via DHCP?

2

MiVoice Office 250/Mitel 5000 / Re: Mitel 5000 Password reset / override?

« on: March 22, 2013, 03:05:01 PM »

I had this issue with a few of our PBXs; we ended up (I believe) running a DB save, performing a sytem upgrade (defaults system, I believe this was 3.x to 5.x) and cherry picking what to restore. This way you get most of the config. and your password is reset.

3

MiVoice Office 250/Mitel 5000 / Re: Assertion Error, Phones Bricking

« on: January 03, 2013, 12:48:44 PM »

Good to know! Thanks Ace! I have a request for replacements in and I will update this post for continuity when I have confirmed we are working.

Thanks again!

4

MiVoice Office 250/Mitel 5000 / Assertion Error, Phones Bricking

« on: January 02, 2013, 07:27:04 PM »

Hi all,

We are using a Mitel 5000 running 5.1.0.42, a new site we've opened (small, ~10 users) is connecting over a site to site tunnel back to the PBX.

Upon plugging phones in, we saw this error on multiple phones. Of course, as soon as we realized this was happening we removed all phones from the network. Attempting to boot, the phone pulls checksum errors and skips the firmware upgrade. After booting into the existing image on the device, we saw the attached error. Once this error occurs, the phone powers up to a blank screen and all LED keys remain lit. These symptoms seem to last indefinitely.

Has anyone experienced this issue before?