Messages

1

Mitel SX200, SX2000, and older SX platforms / Re: prefix stripping.

« on: December 05, 2012, 09:20:42 AM »

Thanks for the info Ralph.  I was able to do the digit stripping thru the ARS.  The problem is that I cannot get it to route out the ISDN trunk group.  I have to route it out a t-1 going to another mitel switch (another trunk group).  I would like to have it hit the speed call number after stripping and go out the ISDN Group.  Thanks

2

Mitel SX200, SX2000, and older SX platforms / Re: COS t-1 trunks for camp on timer

« on: November 30, 2012, 02:20:34 PM »

Thanks Ralph for the info.  If our voice mail ports send calls to camp at the main facility (does not go thru the tie line) it does work and goes out into infinity.  I have been trying to play with the cos to get it do if the call is retained inside the building.  Both the Tie trunk COS and the Voice mail ports COS are set to 180 seconds.

3

Mitel SX200, SX2000, and older SX platforms / prefix stripping.

« on: November 30, 2012, 01:41:33 PM »

We have a mitel sx-2000.  Currently I have a speed call set up for ext. 5598 so it bypasses our tie line to another facility and gets routed to a server at another facility.  I was wondering how I would be able to strip the prefix when people dial 9, 451-5598 and get routed to the same server. 

4

Mitel SX200, SX2000, and older SX platforms / COS t-1 trunks for camp on timer

« on: November 30, 2012, 10:34:27 AM »

I am trying to override the COS camp on timer (180 seconds).  I have our voice mail call tree sending calls thru a t-1 to a remote destination and camping on 4025 sets.  I have been trying to change or make the camp on timer turn off or keep camped on into infinity (or until answered).  Is there a way to do that in the class of service.  Possibly fool or override the system.