Messages

31

Mitel MiVoice Business/MCD/3300 / Re: RAD Stopped playing

« on: August 15, 2015, 03:38:47 AM »

I have done. I was simply looking for Ralph's input. The help files do not tell you to max the timers out... Unless I'm missing something.

32

Mitel MiVoice Business/MCD/3300 / Re: RAD Stopped playing

« on: August 14, 2015, 08:38:54 AM »

So max out expected off hook and leave message length timer at default or set this as per the message length? I'm assuming that after the duration of the message the user will get moh and not dead air?

33

Mitel MiVoice Business/MCD/3300 / Re: RAD Stopped playing

« on: August 13, 2015, 04:13:21 PM »

When you max the timers what are you maxing, expected off hook and message length timers? What is he purpose of these timers if the RAD still loops when the timers don't reflect the actual message duration?

34

Mitel MiVoice Business/MCD/3300 / Re: RAD Stopped playing

« on: August 07, 2015, 03:57:17 PM »

Or the DND form within the ESM [emoji16]

35

Mitel MiVoice Business/MCD/3300 / Re: Phone Stuck on Application Loading

« on: July 25, 2015, 06:56:08 AM »

I had the same thing. Pressing the superkey caused the application loading and the only resolution was a reboot. Phones are on a different VLAN to PBX. It's a reoccurring problem.

36

Mitel MiVoice Business/MCD/3300 / Re: Account code

« on: July 13, 2015, 02:41:27 PM »

I was thinking that. Customer wants to authenticate prior to allowing a call to process. Sort of a private line and should only process on certain cases. Any other thoughts?

37

Mitel MiVoice Business/MCD/3300 / Account code

« on: July 13, 2015, 12:59:25 PM »

Is there a way to force an account code for inbound calls? I would like the user to be prompted to enter code before a call is routed to a NuPoint Call Director.

38

Mitel MiVoice Business/MCD/3300 / Re: 3300 7.1 RingGroup overflow to embedded voicemail box?

« on: June 11, 2015, 10:32:28 AM »

How did you get the mwi? Can you detail your flow of you don't mind having issues with a similar setup.

39

Mitel MiVoice Business/MCD/3300 / Re: MWI for same mailbox on multiple sets

« on: May 28, 2015, 07:36:07 PM »

Ok thanks. Is there no way to get the main message light to flash?

40

Mitel MiVoice Business/MCD/3300 / Re: MWI for same mailbox on multiple sets

« on: May 28, 2015, 07:28:24 PM »

Thanks will this flash the main mwi or just a key

41

Mitel MiVoice Business/MCD/3300 / Re: MWI for same mailbox on multiple sets

« on: May 28, 2015, 07:19:36 PM »

Appreciated... The key as a multicall?

42

Mitel MiVoice Business/MCD/3300 / MWI for same mailbox on multiple sets

« on: May 28, 2015, 06:26:26 PM »

Looking to see a way to have an MWI for one mailbox appear on several devices?

Basically call will come in via MLAA route to a ring group that overflows to another RG that should then leave a message and activate the MWI for all members of the second ring group.

Thanks

43

Mitel MiVoice Business/MCD/3300 / MiVB 7.0 to Asterisk

« on: April 24, 2015, 03:35:25 PM »

Hi looking to see if anyone could either provide me a working SIP peer profile for connecting Mitel to Asterisk. I have the link up and inbound calls from Asterisk to Mitel work, outbound i get a "420 bad extension" - when i look i see a 100rel unsupported in the packet capture.

Any pointers would be appreciated.

Thanks

44

Mitel MiVoice Business/MCD/3300 / Re: Suppress number

« on: April 10, 2015, 04:05:31 PM »

Is this applicable to SIP?

45

Mitel MiVoice Business/MCD/3300 / Suppress number

« on: April 10, 2015, 02:04:54 PM »

Is there a way to suppress the number between internal extensions?

I.e room to room only displaying name?

Regards