Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - brantn

Pages: 1 ... 16 17 [18]
256
Mitel MiVoice Business/MCD/3300 / Re: 3300 ICP Setup and Configure Auto Attendant.
« on: February 17, 2011, 05:06:54 PM »
That is another way to do it as long as you have enough vm licenses you can set single digit vm boxes as transfer only and send them to the destination.

257
Mitel MiVoice Business/MCD/3300 / Re: OCS/Lync Intergration
« on: February 16, 2011, 03:27:53 PM »
Well Lync is a lot better of a pbx than the first stab at it and yes ocs to lbg works the integration to Lync is still up in the air. UC still has a long ways to go in my opinion and with all the hype and work into Lync I am suprised that Microsoft would slash that piece to come out with just a PBX. Directly from their launch party is was stated that the era of the pbx was over.

258
Mitel MiVoice Business/MCD/3300 / Re: 3300 ICP Setup and Configure Auto Attendant.
« on: February 16, 2011, 01:27:34 PM »
You need to look at setting up a multilevel auto attendant with the options you want the help file in 3300s are very useful on how to program.

259
Mitel MiVoice Business/MCD/3300 / Re: Where is the time zone programming on the 3300?
« on: February 16, 2011, 01:26:36 PM »
In newer releases it is now in date and time under the system settings.

260
Mitel MiVoice Business/MCD/3300 / Re: OCS/Lync Intergration
« on: February 16, 2011, 01:22:16 PM »
Yes that would be great to know as I have been told by multiple engineers that the intergration is in the works but no timeline as of now for LYNC support the only thing to currently do that I am aware of is enterprise voice (sip trunking).

261
Mitel MiVoice Business/MCD/3300 / Re: Software Installer Tool
« on: January 26, 2011, 10:54:27 PM »
I believe it is 1280 by 1024 correct me if I am wrong.

262
Mitel MiVoice Business/MCD/3300 / Re: How to know if a DSP has failed
« on: January 26, 2011, 10:53:32 PM »
Yeah that is one way to fix it but that would be the cause of the alarm no dsp to support the compression licenses.

263
Mitel MiVoice Business/MCD/3300 / Re: Software Installer Tool
« on: January 25, 2011, 12:07:59 PM »
I have never found a way to resize this I just move my taskbar to the side during an upgrade.

264
Mitel MiVoice Business/MCD/3300 / Re: Incoming calls blink but, no ringing on recipiets phones
« on: January 25, 2011, 12:06:54 PM »
Second Ralphs recommendations. Check the multicall programming and see if the keys are set to no ring, ring, ring cont.

265
Mitel MiVoice Business/MCD/3300 / Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
« on: January 25, 2011, 12:04:59 PM »
Also to note is this a networked setup. I would suggest getting a copy of the technicians handbook.

266
Mitel MiVoice Business/MCD/3300 / Re: How to know if a DSP has failed
« on: January 25, 2011, 12:03:06 PM »
Maintenance and Diagnostics -> Show DSP Status

How many compression licenses? How many DSPs?

267
Mitel MiVoice Business/MCD/3300 / Re: mitel 3300 icp system, how to factory reset?
« on: January 24, 2011, 05:17:38 PM »
Yes either a boot change and full install from shell or full install from the software installer tool.

268
Mitel MiVoice Business/MCD/3300 / Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
« on: January 24, 2011, 05:13:14 PM »
Step 1 is correct.
Step 2 Can be and upgrade as well.
Step 3 Is unneeded if upgrade is done.
Step 4 Is unneeded if upgrade is done.
Step 5 Should be run Migration Precheck.
Step 6 Convert Database
Step 7 Upgrade to MCD 4.1

Also make sure the CXi has at 512 MB of memory otherwise you need a memory module.

Pages: 1 ... 16 17 [18]