Messages

121

Mitel MiVoice Business/MCD/3300 / Re: Be sure your cell VM requires a password

« on: August 11, 2011, 07:39:25 PM »

It will do it with SIP depending on carrier restriction. Good joke to play on the spouse is change the CPN to the dreaded in laws.

122

Mitel MiVoice Business/MCD/3300 / Re: How to set up a line key (Multiline set key assignment)?

« on: August 11, 2011, 10:15:09 AM »

There is not a real easy solution as what you are trying to do is make a voip pbx into a key system. You can do direct line select with a FAC but as far as lighting a light that is another story that someone can give more information on. I try to really steer people away from this as it makes a mess in programming and negates the power of voip pbx.

123

Mitel MiVoice Business/MCD/3300 / Re: Be sure your cell VM requires a password

« on: August 11, 2011, 10:09:50 AM »

Yeah that is what is at the heart of the Cell phone scandal that was recently going on. This is an option that can be changed in your voicemail under personal options.

124

Mitel MiVoice Business/MCD/3300 / Re: MBG - no way audio?

« on: August 10, 2011, 06:41:12 PM »

Wow thanks for the info. MBG is pretty secure as I have had pen testing done on it. That is a ton of ports to open that is why I have it on a dedicated wan.

125

Mitel SX200, SX2000, and older SX platforms / Re: Mitel SX50 - Printing outgoing calls.

« on: August 10, 2011, 03:14:26 PM »

How do you have this connected to the machine com1 would be the built in serial typically. Those settings are the right speeds, bits, and parity.

126

Mitel MiVoice Business/MCD/3300 / Re: 5314/5324 phone show "extension number" in the display panel

« on: August 10, 2011, 11:42:09 AM »

I dont recall seeing that in a display before is that all it says blinking cursor anything of the sort.

127

Mitel MiVoice Business/MCD/3300 / Re: Lightning Protection For Mitel 3300

« on: August 10, 2011, 11:41:03 AM »

Always take all equipment and racks to a ground buss bar, a ups, and onsp cards in the asu's. We get a lot of lightning around here and yes it is a good revenue steam but with this method we have never lost a 3300 so far. We have lost some old ons cards but this is resolved now with onsp cards haven't lost a card since. As far as pri they should already be grounded if the telco installer knows what they are doing and they typically ground to their copper or to the buss bar as well. Use ground lugs on the Mitel systems to make a proper connection.

128

Mitel MiVoice Business/MCD/3300 / Re: MBG - no way audio?

« on: August 10, 2011, 11:31:01 AM »

First off you break apart firewall rules to minimize the attack area opening that many ports you are a sitting duck there should be a list of ports that need open for the traffic coming in and going out these are the only ones that should be opened. You just opened 64000 ports to the outside world compared to 1000. The reason a dmz configuration is for just that it doesn't apply wan to dmz restrictions to it typically and segregates it from the lan. I am assuming that might be where the issue resides is that it is configured in the firewall for dmz and the rules are not setup to allow that traffic back from lan to dmz. I would highly recommend to fix your firewall change. It isn't and issue having MBG and 3300 on the same network.

129

Mitel MiVoice Business/MCD/3300 / Re: UM Exchange integration problem

« on: August 05, 2011, 01:31:35 PM »

That is correct it is an issue with signalling check step 2 in my post it resolves the issue.

130

Mitel MiVoice Business/MCD/3300 / Re: Mitel SIP Loud Ringer with Teleworker

« on: August 04, 2011, 10:59:19 PM »

At least with a loud bell u dont got to deal with one way audio

Sent from my SCH-I500 using Tapatalk

131

Mitel MiVoice Business/MCD/3300 / Re: 5550IP problems

« on: August 04, 2011, 08:03:12 PM »

Might as well make that a happy face bob got a long ways to go I haven't slept in 3 years. Two 3 year old girls and one 1 year old boy it only gets better though you stop needing sleep after 6 months.

132

Mitel MiVoice Business/MCD/3300 / Re: How to programm Hotdesking on Mitel 3300 ICP

« on: August 04, 2011, 08:00:17 PM »

Yes you are correct Bob.

133

Mitel MiVoice Business/MCD/3300 / Re: How to programm Hotdesking on Mitel 3300 ICP

« on: August 04, 2011, 12:28:18 PM »

Setup an ip device only and setup a user set the class of service for hot desking. Open up the help file and it should give you more details.

134

Mitel MiVoice Business/MCD/3300 / Re: Query for Controller Model

« on: August 03, 2011, 11:00:43 PM »

Same command in esm get system family or something close to that.

Sent from my SCH-I500 using Tapatalk

135

Mitel MiVoice Business/MCD/3300 / Re: Personal ring group/ Dynamic extension.

« on: August 03, 2011, 11:37:20 AM »

Also what are your ring settings on the PRG?