Show Posts
1
Mitel MiVoice Business/MCD/3300 / Register 5302
« on: February 27, 2012, 08:58:20 AM »
Hi All,
I have a problem to register 5302 phone at the Mitel 3300 MCD 4.2
. When all the lights are flashing (after holding the * key) I put the right number followed by the # key PIN and # key (olso tried without a PIN).
The 5302 get's in a loop:
I have already put the 5302 in the same VLAN as the 3300.
Does anyone have an idea to get the 5302 working with the 3300 except the solution don't use the 5302
?
Thanks,
Matt
I have a problem to register 5302 phone at the Mitel 3300 MCD 4.2
. When all the lights are flashing (after holding the * key) I put the right number followed by the # key PIN and # key (olso tried without a PIN).The 5302 get's in a loop:
- Every light is ON
- Under light is flashing
- Under and middle light are flashing
- Every light is off
- Above and Under light are on
- Every light is on (again)
I have already put the 5302 in the same VLAN as the 3300.
Does anyone have an idea to get the 5302 working with the 3300 except the solution don't use the 5302
?Thanks,
Matt