Topics

1

Mitel MiVoice Business/MCD/3300 / hardware change

« on: September 20, 2012, 06:28:05 PM »

Hi, The has a 3300 MX controller but I need to run 4.0 an up releases, but I don't have any MXe contrller only CXi, I try to load the Demo Kit 3300 software into the CXi, I made all the procedures but, when I try to change anything into the controller configuration appears an message that say's "no loading sheet found" and nothin change, what can i do???

2

Mitel MiVoice Business/MCD/3300 / hardware change

« on: July 16, 2012, 04:50:21 PM »

Hi,
I got a mx controller with 9.0 release, And I want to migrate it for the new release using a CXi, my question is.

can I use the Sys ID from the MX to put in into the CXi? with out make any change in the AMC account?
or I have to place a new SYSID into the Cxi to place all the licenses reseting the hardware ID in the AMC.

2. the CXi has a 256 Mb Memory PCI33s-333, For a correct run from the new release I need to change it into a 512 Mb, can I buy it in a Local computer supplier or I need to purchase it from Mitel?

best regarding to every one.

3

Mitel MiVoice Business/MCD/3300 / SIP User using 5212 Ip Phone

« on: June 20, 2012, 10:49:33 AM »

HI.

any ones have the steeps for programing SIP User in a 5212 IP Phone, I mean the configuration steeps in the controller 3300 and in the phone model 5212.

please any help will be appresiated

4

Mitel MiVoice Business/MCD/3300 / SIP Delay link

« on: May 18, 2012, 04:49:15 PM »

HI. I have one 3300 CX with Sip Trunk loaded, the link its with a Samsung Equipment, but some times something happend to the Sip Trunk Link because the user to make a call have to try several times before the samsung answer, i dont know what its happen because before the SIp Link works right but now there exist this delay between the twoo equipments,
how can  I do for restores or kep the link Up there exist a command to look at the link if something its happend?

any information will be appreciate.

best regarding

5

Mitel MiVoice Business/MCD/3300 / how to configure Mitel external Hot Desk User

« on: January 06, 2012, 03:30:40 PM »

can any one send me  screem print for a configuration for a external Hot desk user.
or send me step by step way to program it.

thanks

6

Mitel MiVoice Business/MCD/3300 / problems with audio between Samsung and Mitel SIP trunk link

« on: December 13, 2011, 12:00:58 PM »

HI, its me again.
we have 1 Mitel and a samsung IP system homologed with SIP trunk, but I'm adding another MItel in a different city, using 4 SIP trunk for link to the other 2 systems, my problem is, when I dial a xtension in the Samsung with a IP phone it's not ringingin an d appear a busy message in the screem, but if I made the call from a analog phone, the samsung ring, but when they off hook I can Hear the voice but they can't hear me.
they have a firewall but I dont know wich other ports they have to open for this works right, do you have any information about the ports in TCP/UDP that they have to open in SIP link?
between the MItels all works right, only in the Samsung site I have this problem.

7

Mitel MiVoice Business/MCD/3300 / Wireles IP or SIp Phones

« on: November 16, 2011, 05:32:50 PM »

Any one has a equipment different for Ip dect for IP or SIP wireless phones to connecto into a 3300 MXe controller.

ideas will be great to know

8

Mitel MiVoice Business/MCD/3300 / HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK

« on: November 12, 2011, 12:01:11 PM »

HI, I have two 3300´s, they have loaded SIp trunk each one, but when I try to configure the Sip Peer assigment, appears a message "value out of bound", Every Mitel has 2 SIP trunk licenses, so I place 2 maximall call between they in the profile but nothing apperas to work.
can you writeme the steps to configure this right please.
Note. the client don want propietary licences, so I don use the IP trunks in this case.

thanks for your help.