1
MiVoice Office 250/Mitel 5000 / MiVoice Office 250 connect to FreePBX
« on: June 13, 2018, 04:54:42 AM »
I am looking to connect our production MiVoice Office 250 to a new installation of FreePBX so that extension on the FreePBX box can ring through to the extensions of the 250 and possibly vice versa.
I've tried following this guide http://technologyordie.com/mitel-5000-asterisk-integration and got to adding the SIP Trunk Group, when dialling the trunk number it appears to connect so i can dial a number on the PBX but that says Destination is not responding, and we get the sys alarm #145 out of svc message, this then clears itself.
Has anyone else configured their system this way, and have any pointers as the where I'm going wrong?
I've tried following this guide http://technologyordie.com/mitel-5000-asterisk-integration and got to adding the SIP Trunk Group, when dialling the trunk number it appears to connect so i can dial a number on the PBX but that says Destination is not responding, and we get the sys alarm #145 out of svc message, this then clears itself.
Has anyone else configured their system this way, and have any pointers as the where I'm going wrong?