Topics

1

Mitel MiVoice Business/MCD/3300 / Connect analog telephone to 3300 MXe III via ONS ports

« on: July 07, 2014, 10:53:24 PM »

Hi all,

I am using 3300 MXe III working locally with IP Phones. Now i want to connect 1 analog telephone to the ONS port.

I plugged it into every ONS port on my Mitel PBX which has 4 ONS ports and 6 LS ports but did not get a dial tone on any of them. Could you please let me know how to set up an analog telephone to work via ONS port?

I am looking forward to your quick responses.

Thank you and best regards,
Spencer

2

Mitel MiVoice Business/MCD/3300 / IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: June 30, 2014, 10:20:44 AM »

Hi all,

I am using Mitel IP-PBX 3300 MXe III and some IP Phones Mitel 5324 in my local network (192.168.1.0/24)

IP address of 3300 MXe III is 192.168.1.253, L2 Switch IP address is 192.168.1.254, Default Gateway IP address is 192.168.1.252. DHCP server is enable on this IP-PBX. My laptop IP address is 192.168.1.10 (received IP address from my IP-PBX)

Please kindly find my attachment for more detailed configurations!

And now my IP Phone can not register to the IP-PBX. Please kindly help me fix this problem!

Thanks and best regards,
Spencer

3

Mitel MiVoice Business/MCD/3300 / 3300 MXe III can not boot successfully

« on: June 11, 2014, 10:10:43 PM »

Hi,

Now I install a new MiTel 3300 MXe III with a blank HDD and I have a problem in boot process (please kindly find my attachment). I did install “FileZilla Server” software and “MCDSoftwareInstallerSetup_12.0.3.1” on my PC. I also connect directly 1 ethernet cable from my PC to “10/100/1G LAN 1” port of 3300 MXe III PBX, but I can not ping to 192.168.1.2 successfully from my PC (My PC was set IP Address 192.168.1.123). Could you please let me know how to fix this problem? If possible, please kindly instruct to me step by step.

I set these parameters on my IP-PBX following Technician's Handbook (MCD 6.0):

Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device          : ata=0,0
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : /partition1/RTC8260
inet on ethernet (e) : 192.168.1.2:ffffff00
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : qefcc

Thanks and best regards,
Spencer