Topics

1

MiVoice Office 250/Mitel 5000 / Intermittent Fast busy when trying to make outbound call?

« on: April 02, 2018, 01:24:17 PM »

One day last week and now today we are getting a fast busy signal after we try to make an outbound calls from time to time.  Very random.  Any thoughts or help would be greatly appreciated.

Thanks
Kipp

2

MiVoice Office 250/Mitel 5000 / Adding new DID when we already have the same # Mitel 5000

« on: March 10, 2018, 10:23:30 AM »

We are planning to add another DID. We already have one programmed 7500 with the number being 513- 457-7500 and we are adding another 7500 but its 513-273-7500. I am no expert and every other time we have added a DID they are different Numbers. Any help would be greatly appreciated. Kipp

3

MiVoice Office 250/Mitel 5000 / Old Intetel phone playing hold music will not turn off please help

« on: March 24, 2015, 04:02:45 PM »

Some how a person turned on the hold music to play thru their phone when the phone is hung up.  They can not turn it off nor can I.  Help....   The phone is an old intertel 8500.

Thanks
Kipp

4

MiVoice Office 250/Mitel 5000 / Old Intertel IP 8600 IP phone

« on: July 22, 2014, 10:56:52 AM »

I ran across 2 Intertel 8600 IP phones they however are not set up.  I do not have the MAC address and its not on the phone like the others we have.  Also the 8600 does not have a screen so I can not look for it in the screen.  Any ideas?

Thanks
Kipp

5

MiVoice Office 250/Mitel 5000 / Phantom with Long Distance Codes

« on: June 16, 2014, 08:55:35 AM »

I have a Mitel 5000 and when we call long distance it requires an LD code.  After hours i have several extension that will go to a phantom (cell phone) which are long distance so I have to enter in a long distance code. After the caller presses the extension they hear a series of tones and a dial tone before ringing. Is there a way to prevent these tones (sounds).  The caller sometimes hang up before it rings the phone.

Thanks
Kipp

6

MiVoice Office 250/Mitel 5000 / Application and Phantom

« on: January 17, 2013, 11:11:16 AM »

Warning I am a newbie.  I have created an application and in the digit translation I have it transferring to an extension.   Actually a phantom that points to an outside number.  When I press 3 it works fine it it dials then number that is associated with the phantom.  When I push 4 i get a voice telling me its transferring to an extension (phantom) and then it rings.  How do i get #4 to ring directly with out the voice saying transferring to the extension.  Thanks  Kipp