Topics

1

Mitel MiVoice Business/MCD/3300 / Extend Paging System

« on: August 29, 2013, 02:30:56 AM »

Hi, does anybody know if we can connect the Mitel 5312 IP phones to an amplifier so we can use external speakers as a paging and PA system?
Thanks.

2

Mitel MiVoice Business/MCD/3300 / Voice Mail Stuck in Limbo

« on: June 20, 2013, 09:22:43 PM »

Hi there, I have a strange issue.

I have one voicemail box that forwards to an email address.  When I changed IPs of my Mitel box the emails stopped flowing and I found out that the Exchange Server was not relaying from the Mitel IP.  New voice mail messages are now working and going to the correct email.  However, there is about 65 messages that are in the voicemail box that are not being forwarded.  THere was an error message in the log file saying that they couldn't be forwarded because of SMTP issue (before fixing Exchange).

Does anyone know how to push these messages through?

I forgot to mention. I have tried to reboot the Mitel 3300, no luck

3

Mitel MiVoice Business/MCD/3300 / Hot Desking Auto Logout?

« on: May 20, 2013, 08:52:55 PM »

Hi there,

I have a Mitel 3300 controller and Mitel 5312 and 5330 phones on site.  We have only a few users that use hot desking and the rest are just regular users.

What happens is that every night the host desk phones log out and go back to their original numbers.  Is there a way to have them not auto log out?

The users that hot desk only switch on Fridays and they often come in and there phones are logged out and start to miss calls.

Thanks you
Tyson

4

Mitel MiVoice Business/MCD/3300 / Mitel 3300 MXe III drops IP address

« on: January 08, 2013, 01:00:47 AM »

HI there,

I am currently in the process of reconfiguring all our network devices.  We used to have a flat network with no VLANs and now we have VLANs.  Im at the stage of putting out Mitel phone system on it's own VLAN.

I changed to IP address of the Mitel 3300 MXe III and it now boots up fine, but after about 5 minutes of being booting up it drops its IP address.  During the boot up I can ping the device and once booted the phones even get the proper (new) VLANs and DHCP addresses, however after about 5 minutes I loss connection to the 3300 and all the phones go offline.

Does anyone have any suggestions about this at all?