Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Register 5302

« on: March 13, 2012, 11:41:35 AM »

Hi Guys,

I send the device for RMA. The new one works!

Thanks for de comments!

2

Mitel MiVoice Business/MCD/3300 / Re: Register 5302

« on: February 29, 2012, 11:05:37 AM »

Hi Mattmayn,

Thanks for your message. I dont't use a discovery protocol. I already tried to put the 5302 in the access port on the VLAN (same VLAN as the 3300 and another VLAN). I can see the Mitel (DHCP server for the IP phones) give the device an IP and I can also ping the device.

I understand why you don't like to use the displayless phones. 

3

Mitel MiVoice Business/MCD/3300 / Register 5302

« on: February 27, 2012, 08:58:20 AM »

Hi All,

I have a problem to register 5302 phone at the Mitel 3300 MCD 4.2 . When all the lights are flashing (after holding the * key) I put the right number followed by the # key PIN and # key (olso tried without a PIN).

The 5302 get's in a loop:

• Every light is ON
• Under light is flashing
• Under and middle light are flashing
• Every light is off
• Above and Under light are on
• Every light is on (again)

I have already put the 5302 in the same VLAN as the 3300.

Does anyone have an idea to get the 5302 working with the 3300 except the solution don't use the 5302  ?

Thanks,

Matt