1
SIP On Mitel / Re: 5330 Firmware Issues
« on: December 07, 2018, 08:53:24 AM »
Anyone?
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
SIP On Mitel / Re: 5330 Firmware Issues
« on: December 05, 2018, 03:03:33 AM »
Hi guys,
First time using Mitel
. I recently got my hands on a Mitel 5330 which has the following firmware:
Main: 05.02.02.07
Boot: 05.02.02.01
I have set it to SIP mode which I plan to use with my FreePBX system. I have failed miserably trying to get this phone to register or flash.The web interface only allows to point to a TFTP server which as far as I can tell only reboots the phone but doesn't read my cfg file.
I noticed that upon resetting to defaults, I could set SIP and enable firmware updates via TFTP. I have done both but the TFTP server address is wrong as it errors out. When the phone boots, I can get into the Admin Tools and make some changes. However, when I try to enter the IP address for my TFTP server, there is no way to add the "dot" on the IP address. When I tap twice on the * button I get *. For example, my IP address looks like 192*.168*.0*.2 Its is very strange. I have not found a way to move the cursor over. When I backspace, it deletes the character.
I am hoping someone here can share their SIP working firmware alongside some pointers on how to flash the 5330. A version that has a Web GUI would be nice but a flat cfg file version is also welcome.
Thanks
First time using Mitel
. I recently got my hands on a Mitel 5330 which has the following firmware:Main: 05.02.02.07
Boot: 05.02.02.01
I have set it to SIP mode which I plan to use with my FreePBX system. I have failed miserably trying to get this phone to register or flash.The web interface only allows to point to a TFTP server which as far as I can tell only reboots the phone but doesn't read my cfg file.
I noticed that upon resetting to defaults, I could set SIP and enable firmware updates via TFTP. I have done both but the TFTP server address is wrong as it errors out. When the phone boots, I can get into the Admin Tools and make some changes. However, when I try to enter the IP address for my TFTP server, there is no way to add the "dot" on the IP address. When I tap twice on the * button I get *. For example, my IP address looks like 192*.168*.0*.2 Its is very strange. I have not found a way to move the cursor over. When I backspace, it deletes the character.
I am hoping someone here can share their SIP working firmware alongside some pointers on how to flash the 5330. A version that has a Web GUI would be nice but a flat cfg file version is also welcome.
Thanks
Pages: [1]