Messages

1

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 14, 2018, 08:10:09 AM »

http://mitelforums.com/forum/index.php?topic=6889.msg30913#msg30913

Thank you again, and apologies for not using the search function. I will have a proper read through the document on here and correct/update my configuration. With sarond and your help I have been able to make and receive calls to extensions on both systems that i set out to do, so I think it should just need fine tuning.

2

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 14, 2018, 07:38:24 AM »

sarond and TE thank you, after changing the trunk to PJSIP and setting the E.164 to no i can now call from MiVO250 to the extension on FreePBX.

Next step getting it to work the other way FreePBX to MiVO250.

3

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 14, 2018, 07:00:09 AM »

Ok, I have changed the trunk on FreePBX I had two options (chan_SIP or chan_PJSIP). I'm now using chan_PJSIP this doesn't give me the option to enter Peer/User options, so I must have these incorrect on the other trunk option. Now from an extension on the MiVO250 I can dial the trunk, add an extension number but get a message (from FreePBX?) that the number I have dialled is not in service +58XX.

4

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 14, 2018, 04:33:32 AM »

Ok, I've moved FreePBX on to the same subnet.

Configuration is attached.

I will need to figure out how to remove the +. I am dialling the trunk extension 92001, then when that appears to be connected the extension on FreePBX 5800 or 5801.

5

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 13, 2018, 10:10:30 AM »

Run sngrep on the FreePBX box and watch the SIP conversation.

Is +5802 a valid extension number?

sngrep details are pretty much the same as what is shown in the Mitel diag log.

5802 is not an extension in FreePBX but 5801 is.

Try changing your Nat setting in your SIP Peer on the MiVO250.

Same results when changed from No NAT or SIP-Aware NAT to Non-SIP-Aware NAT

6

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 connect to FreePBX

« on: June 13, 2018, 09:18:05 AM »

TE thanks for the guidance on logging. Attached is the log.

It seems that I am getting the message 'SIP/2.0 500 Internal Server Error'.

7

MiVoice Office 250/Mitel 5000 / MiVoice Office 250 connect to FreePBX

« on: June 13, 2018, 04:54:42 AM »

I am looking to connect our production MiVoice Office 250 to a new installation of FreePBX so that extension on the FreePBX box can ring through to the extensions of the 250 and possibly vice versa.

I've tried following this guide http://technologyordie.com/mitel-5000-asterisk-integration and got to adding the SIP Trunk Group, when dialling the trunk number it appears to connect so i can dial a number on the PBX but that says Destination is not responding, and we get the sys alarm #145 out of svc message, this then clears itself.

Has anyone else configured their system this way, and have any pointers as the where I'm going wrong?