Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Setting up a simple greeting for a support line

« on: August 13, 2016, 02:36:46 AM »

Yes sorry it's the embedded voicemail ports!

2

Mitel MiVoice Business/MCD/3300 / Setting up a simple greeting for a support line

« on: August 12, 2016, 05:11:25 PM »

Hi,
Whats the best way to go about the following:

1. User dials support line on 6350.
2. Greeting is played and then forwards onto a ring group.
3. If call is not answered its sent to a VM.

Many thanks in advance!
Joe

3

Mitel MiVoice Business/MCD/3300 / Re: Remove SX2000 Light Per cab from the system

« on: May 24, 2016, 06:48:44 AM »

Many thanks, that's really helpful. Noticed I also have some analogue numbers used for call menu's etc which I'll need to move off.

4

Mitel MiVoice Business/MCD/3300 / Remove SX2000 Light Per cab from the system

« on: May 20, 2016, 02:34:19 PM »

Dear all,
Some advice on how to correctly remove the SX2000 cab from the 3300 would be really helpful.
I *think* I have identified the page where I would remove it but I am not sure and do not want to do something which might cause issues.
No analogue lines are connected to the cab anymore and I have disconnected the 9 cables going to the wall boxes where they used to be patched in to analogue phone.
The per cab is connected via fibre connection to the 3300 and I have tried disconnecting the fiber for a couple of minutes to see what the warning where to determine where to look.

The screen shot below shows the page I think I just select and delete the per cab (Sx2000).



Any help would be much appreciated!
Joe