Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Connect analog telephone to 3300 MXe III via ONS ports

« on: July 22, 2014, 12:36:54 PM »

Dear x-man,

I am a newbie in Mitel IP-PBX, there are a lot of documents so this made me confused. After having your instructions, I know that i have to focus on which chapter or which session of the document.

Once again, thank you so much!

2

Mitel MiVoice Business/MCD/3300 / Re: Connect analog telephone to 3300 MXe III via ONS ports

« on: July 22, 2014, 11:55:21 AM »

Hi jrg0852,

Thank you so much for your kindly support!

I did already understand what I missed in my configuration progress from your instructions.

Best regards,
Spencer

3

Mitel MiVoice Business/MCD/3300 / Re: Connect analog telephone to 3300 MXe III via ONS ports

« on: July 22, 2014, 10:17:34 AM »

Hi jrg0852,

This attachment is my Analog Services Units you need.

Thanks and best regards,
Spencer

4

Mitel MiVoice Business/MCD/3300 / Re: Connect analog telephone to 3300 MXe III via ONS ports

« on: July 22, 2014, 05:08:11 AM »

Hi all,

I browsed to ONS/OPS Circuit Descriptor form and choosed the Circuit Descriptor 1 with the default settings. But when I browsed Analog Sets form, I didn't see anything here. Please kindly help me this issue!

I am connecting an analog phone to port ONS 3 of Mitel 3300 MXe III (4 ONS ports and 6 LS ports) without any tone signal.

Thanks and best regards,
Spencer

5

Mitel MiVoice Business/MCD/3300 / Connect analog telephone to 3300 MXe III via ONS ports

« on: July 07, 2014, 10:53:24 PM »

Hi all,

I am using 3300 MXe III working locally with IP Phones. Now i want to connect 1 analog telephone to the ONS port.

I plugged it into every ONS port on my Mitel PBX which has 4 ONS ports and 6 LS ports but did not get a dial tone on any of them. Could you please let me know how to set up an analog telephone to work via ONS port?

I am looking forward to your quick responses.

Thank you and best regards,
Spencer

6

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: July 01, 2014, 01:20:39 PM »

Dear Sarond,

Follow to your guide, my IP phone successfully registered to 3300 MXe III PBX with DHCP from windows server 2008.

Thank you so much for your kind responses!
Spencer

7

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: July 01, 2014, 07:09:44 AM »

Hi ghost,

I intend to disable dhcp of my pbx and use dhcp on my windows server 2008 or modem/router. I dont see the option 128 in DHCP Scope of windows server 2008. And i dont know how to set option 128 on modem/router.

Could you please let me know how to set dhcp server outside ip-pbx?

Thanks and best regards,
Spencer

8

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: July 01, 2014, 04:44:56 AM »

Hi X-man,

I did register this IP Phone successfully to my IP-PBX when i use DHCP server which is stayed on 3300 MXe III. But when i change DHCP server to the modem, IP Phone's LED screen appeared "DHCP: Discovery Option 128 missing". What should I do to fix this problem?

Thank you and best regards,
Spencer

9

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: July 01, 2014, 03:06:47 AM »

Hi ghost,

I did complete your 2 instructions, and now the LED screen of IP Phone 5324 appeared "USE Superkey TO SEND PIN". I press 5555 and blue key but this IP Phone is still not registered successfully.

What should I do for being continued?

Thanks and best regards,
Spencer

10

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: June 30, 2014, 09:43:28 PM »

Hi X-man,

there are nothing in vlan option. please find my attachment for more details!
 
Thanks and best regards,
Spencer

11

Mitel MiVoice Business/MCD/3300 / Re: IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: June 30, 2014, 11:57:39 AM »

Hi Jason TL,

I am connecting IP Phone to PBX via a Layer 2 switch, not directly.

Hi X-man,

I don't have any VLAN in my network, only one network 192.168.1.0/24. And you mean that I have to delete option 125 in DHCP Options Configuration? and all the remains will not be removed?

Thanks and best regards,
Spencer

12

Mitel MiVoice Business/MCD/3300 / IP Phone 5324 can not register to Mitel 3300 MXe III successfully

« on: June 30, 2014, 10:20:44 AM »

Hi all,

I am using Mitel IP-PBX 3300 MXe III and some IP Phones Mitel 5324 in my local network (192.168.1.0/24)

IP address of 3300 MXe III is 192.168.1.253, L2 Switch IP address is 192.168.1.254, Default Gateway IP address is 192.168.1.252. DHCP server is enable on this IP-PBX. My laptop IP address is 192.168.1.10 (received IP address from my IP-PBX)

Please kindly find my attachment for more detailed configurations!

And now my IP Phone can not register to the IP-PBX. Please kindly help me fix this problem!

Thanks and best regards,
Spencer

13

Mitel MiVoice Business/MCD/3300 / Re: 3300 MXe III can not boot successfully

« on: June 13, 2014, 04:18:26 AM »

Hi All,

Thank you so much for all your kind support.

Following all your instructions, this problem has just been fixed and my IP-PBX is working well

Have a nice day!

Thanks and best regards,
Spencer

14

Mitel MiVoice Business/MCD/3300 / Re: 3300 MXe III can not boot successfully

« on: June 13, 2014, 12:08:51 AM »

Hi Sarond,

Following your instruction, I did install "MCD_Installation_12.0.3.15.exe" file on my PC and set "Shared folders" to the extracted location (C:\Program Files (x86)\Mitel\3300ICP\12.0.3.15) on FileZilla Server. But this problem is still appeared. Could you please let me know what I should continue to do?

Thanks and best regards,
Spencer

15

Mitel MiVoice Business/MCD/3300 / Re: 3300 MXe III can not boot successfully

« on: June 12, 2014, 11:02:05 PM »

Hi all,

Thank you for all your kind support!

I set "host inet (h)" to 192.168.1.21 (my PC's IP Address) and now i can ping to IP Address 192.168.1.2 of 3300 MXe III from my PC (pic.1 and pic.3).

But I still can not load file successfully from my FTP server. I did install FileZilla Server on my PC to establish a FTP server. And I also enabled 1 account ftp with password ftp, after that I configure "Shared Folders" to the location of "MCD_Installation_12.0.3.15.exe" file (pic.2). The error is in the log file as below:

Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device          : qefcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.21
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : FixPartition

Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...  timeout - retry
Loading...
Error loading file: errno = 0x3c.
Can't load boot file!!

I hope that all of you will be willing to help me fix this problem.

Thank you and best regards,
Spencer