Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: evan631 on September 08, 2010, 12:32:28 PM

Title: need help fast...900s
Post by: evan631 on September 08, 2010, 12:32:28 PM

I have a VP that needs to dial a 900, and unfortunately we do not have 900s routed.

how can i quickly get 900-787-0002 to work.

Thanks for the help!
-Evan

PS: i dont need this restricted, the entire branch can use the number.

Title: Re: need help fast...900s
Post by: ralph on September 08, 2010, 01:15:41 PM

Go into your ARS and look at 1800 numbers.   If it's there, copy it's setup.
Remember, that would give you the same privialges as toll free numbers so you may want to change your ARS and restriction levels after the "hot" part of this is over.

Ralph

Title: Re: need help fast...900s
Post by: Chakara on September 09, 2010, 10:24:35 PM

  And if you only want to allow that one 900 number, instead of 1800xxxxxx or whatever is in there, put in the whole number.

-Chak

Title: Re: need help fast...900s
Post by: hsearson on September 10, 2010, 11:03:10 AM

900787000 folllowed by 0 routes to an accesible termination point

Title: Re: need help fast...900s
Post by: ralph on September 10, 2010, 02:08:22 PM

hsearson,
This is a new one on me.  What is a "accesible termination point"?

Ralph

Title: Re: need help fast...900s
Post by: Mattmayn on September 13, 2010, 11:48:34 AM

Ralph, my guess would by the PSTN.

Title: Re: need help fast...900s
Post by: ralph on September 13, 2010, 12:00:41 PM

That was my guess but the obfuscation exceeds my capacity for optimal cerebral rendering.

Ralph