Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: saliou-ab on May 04, 2017, 09:29:48 AM

Title: Emergency call configuration on Mitel MXEIII (7.2)
Post by: saliou-ab on May 04, 2017, 09:29:48 AM

Dear All,

I'm Trying to activate the Emergency feature on my Mitel MiVoice MXeIII 3300ICP (release 7.2).

I've created a hunt group in the Emergency type.

I've defined the route for Emergency and Panic Emergency numbers.

I've defined the ARS Digit Dialed

But it is not working properly. If I dial 999 or 9999:

1- sip phones are displaying (failed to establish connection) before sending the Emergency request then rings to the console as Emergency call.

2- Mitel phones are displaying Error and not sending the emergency call to the Console.

I can't find what I've missed.

Please help to correct this configuration.

Will it be possible to the correct configuration procedure steps?

Thanks in advance.

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: saliou-ab on May 05, 2017, 01:30:06 PM

For the question I mean the correct configuration steps.

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: ralph on May 06, 2017, 10:30:43 AM

In maintenance do a "DGT Tr 999" and "DGT Tr 9999".
Be sure the call is going out the trunk group you think it should.

Ralph

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: saliou-ab on May 09, 2017, 10:28:45 AM

Yes it seem to be correct.

when I use the command "DGT TRACE 9999" I get the following result:

DGT Trace started:                                                             
9999 : ARS 9999 +  0, ARS 9999 +  0, Route (4)                                 
DGT Trace completed.                                                           


This route is matching my configuration.

But if I put "DGT TRACE 999" the result is as follow:

DGT Trace started:                                                             
Termination cannot be determined, more digits are required.                     
DGT Trace completed.

Thanks

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: mszodiac on May 09, 2017, 12:01:14 PM

Is "999" entered in your ARS digits dialed with "0" digits to follow?

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: saliou-ab on May 09, 2017, 01:07:36 PM

correct.

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: x-man on May 09, 2017, 01:38:00 PM

Use digit mod to add a 9 in when you dial 999 using a separate route.

Title: Re: Emergency call configuration on Mitel MXEIII (7.2)
Post by: ralph on May 10, 2017, 08:29:07 AM

I think you could also program a system speed dial to handle it.

Ralph