Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: arash on April 10, 2017, 06:08:15 AM
-
Hello,
I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.
Is there any way to disable this feature from 3300?
I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.
-
Hello,
I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.
Is there any way to disable this feature from 3300?
I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.
Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).
-
Hello,
I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.
Is there any way to disable this feature from 3300?
I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.
Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).
It just disable voice encryption but not the signalling.
-
Hello,
I wanted to extract all the signalling information from network packets which were captured with a switch (port mirroring and wireshark). Unfortunately the packets data encrypted and with a little search I realized that the encryption may be aes-128.
Is there any way to disable this feature from 3300?
I had a similar problem with voice data too and there was an option in web interface to disable it, but I haven't had any luck to find anything about signalling.
Disable System Options - Voice Encryption, it changes in real time for all new calls (existing calls are not changed).
It just disable voice encryption but not the signalling.
To be honest, I didn't think signalling was encrypted, only audio... When support has us do captures that is the only change made.
Sent from my XT1575 using Tapatalk
-
See which port is used for MiNet signalling, it should be any of these:
6800 TCP MiNet Server (at 3300)
6801 TCP Secure MiNet (SSL) (at 3300)
6802 TCP Secure MiNet (AES) (at 3300)
-
See which port is used for MiNet signalling, it should be any of these:
6800 TCP MiNet Server (at 3300)
6801 TCP Secure MiNet (SSL) (at 3300)
6802 TCP Secure MiNet (AES) (at 3300)
It is 6802, AES ... :(