Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gimitel on August 18, 2010, 09:36:06 PM

Title: Mitel IP Phones on Cisco Switch
Post by: gimitel on August 18, 2010, 09:36:06 PM

Guys,

I program auto Qos on all ports on a cisco switch. I also program two vlan on the ports one for data and the other for voice.
Will i get technical problems by enable auto qos on the cisco switch?

Thanks,

Gimitel

Title: Re: Mitel IP Phones on Cisco Switch
Post by: glennmitel on August 19, 2010, 10:25:06 AM

just make sure that if you setup the L2 qos on the Mitel 2 6 match it on the switch


switchport mode access
switchport access voice vlan xxx


then apply qos to the port and the vlan that way you cant go wrong

Title: Re: Mitel IP Phones on Cisco Switch
Post by: Mitel100 on August 19, 2010, 04:09:28 PM

Auto QOS will mark voice as COS of 5 on the cisco switch, as glenmitel says just make sure that the mitel priorities reflect this.

Title: Re: Mitel IP Phones on Cisco Switch
Post by: Chakara on August 19, 2010, 11:09:02 PM

Ditto!

-Chak

Title: Re: Mitel IP Phones on Cisco Switch
Post by: gimitel on August 20, 2010, 09:30:21 AM

thanks guys