Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: sudheesh@atcom.ae on February 25, 2017, 09:27:57 AM
-
Dear All,
when we make out going call from 5540 Ip console only 7 digit is displaying on the caller ID field. For Incoming the caller ID showing full number after the changes on the consoles COS as follows ,
Display ANI/DNIS/ISDN Calling/Called Number Yes
Display ANI/ISDN Calling Number Only No.
I have sip trunk here , Kindly help t
Regards,
sudheesh
-
Dear All,
when we make out going call from 5540 Ip console only 7 digit is displaying on the caller ID field. For Incoming the caller ID showing full number after the changes on the consoles COS as follows ,
Display ANI/DNIS/ISDN Calling/Called Number Yes
Display ANI/ISDN Calling Number Only No.
I have sip trunk here , Kindly help t
Regards,
sudheesh
Outgoing caller ID is not controlled by COS, look in the Associated Number table or Outgoing DID Substitution table, the extension of the console probably has the wrong number assigned to it.
-
Dear All,
when we make out going call from 5540 Ip console only 7 digit is displaying on the caller ID field. For Incoming the caller ID showing full number after the changes on the consoles COS as follows ,
Display ANI/DNIS/ISDN Calling/Called Number Yes
Display ANI/ISDN Calling Number Only No.
I have sip trunk here , Kindly help t
Regards,
sudheesh
Outgoing caller ID is not controlled by COS, look in the Associated Number table or Outgoing DID Substitution table, the extension of the console probably has the wrong number assigned to it.
Hi,
I mean the caller ID on the console display, not the sending number.For example i am dialing a 10 digit mobile number form a console, when i just press to dial the dialed number on the display become 7 digit, the first 3 digit of the mobile number is removing.
-
Outgoing caller ID is not controlled by COS, look in the Associated Number table or Outgoing DID Substitution table, the extension of the console probably has the wrong number assigned to it.
Hi,
I mean the caller ID on the console display, not the sending number.For example i am dialing a 10 digit mobile number form a console, when i just press to dial the dialed number on the display become 7 digit, the first 3 digit of the mobile number is removing.
[/quote]
Is that how the digits are outpulsed on the trunk? There is a COS option to display digits as outpulsed, I can't remember the option specifically...
-
How do you turn on under applications Mitel 5540 IP for caller ID. Our system is currently not showing external calls and I’m not sure how to turn it on. Basically we have a prank caller that’s been calling 50 to 70 times at night giving us a hard time. I would like to see what number is Caller number and what Trunkline.
-
If you never see caller ID on any device for any call then your best option is to call the dealer and see what it will take to activate it. There's a number of things that need to be in place.
If your phone normally gets caller ID but not getting it when you get the prank calls then that would be because the caller has blocked it. Next step would be to call your carrier.
Ralph