Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: johnp on February 22, 2017, 06:44:38 PM

Title: Sip ATA connected to faxfinder
Post by: johnp on February 22, 2017, 06:44:38 PM

Anyone tried this type of connectivity? This is more about inbound routing by setting the sip extensions in a voicemail hunt group. A coworker tried this on a vMCD and they got no dtmf after answer.

Further thinking, perhaps Mitel design to a sip device in a vm hunt group looks for the forward info. I was hoping Ralph might have some thoughts.

Additional thoughts would be to try a loopback trunk and send <E> after a <T> with sufficient timeout value.

Title: Re: Sip ATA connected to faxfinder
Post by: ralph on February 22, 2017, 10:25:10 PM

I suspect you won't be able to gen DTMF after the VM picks up like you would with an ONS line.
I think you're correct that the only way to make it happen would be to use a loop back.  Even then, timing may be tough to get right.

Ralph