Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: shafiu on January 03, 2017, 10:56:49 PM

Title: mitel 3300 mx
Post by: shafiu on January 03, 2017, 10:56:49 PM

about 15 min IP connection getting lost
then I have to reset the PABX. when I check the log files, it shows MIPS disconnecting errors
it is a MXe two

Title: Re: mitel 3300 mx
Post by: x-man on January 04, 2017, 09:34:35 AM

Sounds like its the layer 2 switch problem that is well known. Its a replacement MXE needed  as there is no cure for it permanently. There is a command you can run that will overcome it for a temp fix. You can issue the command "period 900,mips_reset" without quotations into vxworks and this will reset the L2 switch every 900 secs. However this interrupts the LAN whilst the reset occours for a couple of seconds. You may have to adjust the timer if its too long.