Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gimitel on September 30, 2016, 11:32:19 PM

Title: program Cetis SIP Phones on a Mitel 3300.
Post by: gimitel on September 30, 2016, 11:32:19 PM

Hi Mitel Friends
I need to program Cetis SIP Phones on a Mitel 3300.
Can someone guide me through how to program these type of sip phones on Mitel 3300.
These Cetis phones are hotel room phones.
What I already did was programming a sip device capabilities, but was wondering if I need to use generic sip phones at device type when programming its User and Services Configuration ?

Please advise

Title: Re: program Cetis SIP Phones on a Mitel 3300.
Post by: petr.necas on October 26, 2016, 10:57:46 AM

Hello, we configured Cetis phones recently and used Device Type = Generic SIP Phone and it worked fine. Do you have any specific issues with the configuration?

Title: Re: program Cetis SIP Phones on a Mitel 3300.
Post by: lundah on October 26, 2016, 11:00:10 AM

You need to both set up a SIP Device Capabilities profile to tell the system which SIP features the endpoint is capable of, and also assign the set as a "Generic SIP Device" in User and Device Configuration so that you can apply the SIP Device Capability profile to the set.

Title: Re: program Cetis SIP Phones on a Mitel 3300.
Post by: petr.necas on October 26, 2016, 11:24:20 AM

lundah is right. We also set the following option in SIP Device Capabilities fro the Cetis phones:

Prevent the Use of IP Address 0.0.0.0 in SDP Messages      Yes

Did you change any other option?