Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: lundah on August 09, 2016, 09:05:16 AM

Title: AudioCodes MP-1xx analog gateways - FXO to DID?
Post by: lundah on August 09, 2016, 09:05:16 AM

Looking for anyone who's managed to configure an FXO interface on an AudioCodes MP-1xx series gateway to send the answer point DN from the FXO port on the gateway rather than having to program it in Trunk Attributes.

My application is for a large customer that will be deploying a large number of MP-114 2S/2O gateways for a local 911 line at each remote site. I would like to be able to use the Automatic Dialing feature of the MP-114 to send the DN of the answer point instead of assigning a different Trunk Service Number with a different answer point for each gateway.

If anyone out there has done this, let me know.

Title: Re: AudioCodes MP-1xx analog gateways - FXO to DID?
Post by: lundah on August 09, 2016, 02:05:56 PM

So this wound up being much simpler than I expected. I just need to add the DN I want to ring in the Automatic Dialing form in the AudioCodes gateway, and assign the Trunk Service Number the same as you would for any other DID trunk (leave non-dial in Answer Point fields blank, enter the appropriate values for digits to absorb/insert).