Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: VinceWhirlwind on June 06, 2016, 12:03:25 AM

Title: Syncing MiCollab with AMC
Post by: VinceWhirlwind on June 06, 2016, 12:03:25 AM

I'm sure this is going to be a dumb question because I'm sure I've done this before, but I read the I&M manual and couldn't see it anywhere....
 
The firewall people are going to do some work replacing the firewall - how do I manually test that they haven't broken the AMC access after their work is complete?

Title: Re: Syncing MiCollab with AMC
Post by: VinceWhirlwind on June 06, 2016, 01:50:17 AM

a-ha!
Under ServiceLink, Status, there is a button "Sync".

Title: Re: Syncing MiCollab with AMC
Post by: markyb73 on June 07, 2016, 04:45:06 PM

Hi,

You could also log into the linux shell and try and ssh to sync.mitel-amc.com

That for me is normally a good bet that licensing will work to amc.

I think its port 22 outbound needs to be open for the server.

Cheers !

Title: Re: Syncing MiCollab with AMC
Post by: VinceWhirlwind on June 07, 2016, 06:21:38 PM

Good idea.