Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on May 24, 2016, 11:53:00 AM

Title: Mitel Embedded VM with 3rd Party PBX via SIP
Post by: ralph on May 24, 2016, 11:53:00 AM

Has anyone see where a 3rd party PBX is connected to a 3300 via SIP and using the embedded VM?

Something like Asterisk -->>3300.

I need to do this and I'm looking for how it may be done.
I'd need forward to VM box on RNA/Busy and message waiting lamps.

Ralph

Title: Re: Mitel Embedded VM with 3rd Party PBX via SIP
Post by: wiseguy on May 25, 2016, 04:04:58 PM

Don't think that this will work as MB can only be added to a known DN. If this can be setup then tha SIP connection must be set to Private mode.(internal used connection)

Title: Re: Mitel Embedded VM with 3rd Party PBX via SIP
Post by: ralph on May 26, 2016, 08:09:07 AM

Thanks wiseguy.
This is new to me:

Quote

If this can be setup then tha SIP connection must be set to Private mode.(internal used connection)

I haven't heard of that.  How is that configured?

Ralph

Title: Re: Mitel Embedded VM with 3rd Party PBX via SIP
Post by: wiseguy on May 26, 2016, 06:03:51 PM

On the SIP Peer profile. On the Tab Call Routing you should set the option Private SIP Trunk to YES. Calls over that connection will ring like an internal call.