Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: JoeMatthews on May 20, 2016, 02:34:19 PM
-
Dear all,
Some advice on how to correctly remove the SX2000 cab from the 3300 would be really helpful.
I *think* I have identified the page where I would remove it but I am not sure and do not want to do something which might cause issues.
No analogue lines are connected to the cab anymore and I have disconnected the 9 cables going to the wall boxes where they used to be patched in to analogue phone.
The per cab is connected via fibre connection to the 3300 and I have tried disconnecting the fiber for a couple of minutes to see what the warning where to determine where to look.
The screen shot below shows the page I think I just select and delete the per cab (Sx2000).
(http://s32.postimg.org/netomydmp/Per_Cab.jpg)
Any help would be much appreciated!
Joe (http://postimg.org/image/netomydmp/)
-
That's the correct page, but have you unprogrammed all the cards in the Card Assignment form? If not, it won't let you remove the cabinet.
-
Many thanks, that's really helpful. Noticed I also have some analogue numbers used for call menu's etc which I'll need to move off.