Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gimitel on May 18, 2016, 08:33:41 AM

Title: Error programming ASU II
Post by: gimitel on May 18, 2016, 08:33:41 AM
Hi Mitel Friends,

Yesterday i tried to program an ASU II.
The CIM Module is connected Controler Module 1.
When i go to Analog Service Units and selected the ASU II in the Program Type i am getting an message (There is no more room for message).

Can someone help me how to resolve this issue ?

Thanks in advanced.

Gimitel
Title: Re: Error programming ASU II
Post by: ralph on May 18, 2016, 09:03:54 AM
Usually when I see a "No more room for records" message it means that you need to change your dimensions. 
Look under the System Capacity form to see if you have room to add analog lines or trunks.
If you need to change your dimension then the form is Dimension Selection.  If you make any changes you'll need to do a data save and restore.

Ralph
Title: Re: Error programming ASU II
Post by: august on May 18, 2016, 07:19:17 PM
Is it a CX?

You can only use 3 of the 4 ports.