Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: k.parrent on April 18, 2016, 05:33:54 PM

Title: Need help with DEE routing steps
Post by: k.parrent on April 18, 2016, 05:33:54 PM

I created a phantom and a user profile for the phantom with DEE active. I also created a vm box for the phantom. The associated destinations are desk 2012 - mobile xxxxxxx - voicemail 2500. The routing steps are 1 - desk and mobile - 15 secs. and 2 - voicemail. I can not get the call to hit the second routing step. My call to 2012 rings the cell phone until the cell phone vm picks up. What am I missing?

Title: Re: Need help with DEE routing steps
Post by: Hershel on April 18, 2016, 06:23:35 PM

What software version? 

I know there were some older versions that we are bit bugging when it come to DEE.
I believe a work around we used was create a new step with a ring duration of 1 second so it looked like this

Step 1
16 seconds
Desk & Mobile

Step 2
1 second
Desk & Mobile

Step 3
Voice Mail

Title: Re: Need help with DEE routing steps
Post by: k.parrent on May 12, 2016, 04:03:56 PM

I discovered that when I turn human answer supervision on for the user DEE will follow the routing step timer and the call will be answered by the system vm box if I do not answer on my cell phone. If the human answer supervision is off then the call does not recognize the routing steps that I have created. However, on another 5000 at a similar software release (6.1.4.64) I have a DEE user set up the same way and the routing steps operate correctly without human answer supervision turned on.

Title: Re: Need help with DEE routing steps
Post by: Tech Electronics on May 12, 2016, 04:06:47 PM

k.parrent,

I have not run into that issue, but there are two PRs out there. 6.1 SP1 PR1 & PR2 that you could try and see if that fixes it.

Thanks,

TE

Title: Re: Need help with DEE routing steps
Post by: dwayneg on May 12, 2016, 08:14:22 PM

Is it possible that the cell VM is just answering too soon and 5000 sees that as answered call, doesn't send call to vm?  Try shortening the step 1 time to see if VM will catch the call then.

Title: Re: Need help with DEE routing steps
Post by: lowradiation on May 13, 2016, 10:58:14 AM

What type of trunks do you have - Analog, PRI or SIP?
I find analog trunks react differently when using DEE

Title: Re: Need help with DEE routing steps
Post by: Hershel on May 13, 2016, 05:56:05 PM

Quote from: k.parrent on May 12, 2016, 04:03:56 PM

I discovered that when I turn human answer supervision on for the user DEE will follow the routing step timer and the call will be answered by the system vm box if I do not answer on my cell phone. If the human answer supervision is off then the call does not recognize the routing steps that I have created. However, on another 5000 at a similar software release (6.1.4.64) I have a DEE user set up the same way and the routing steps operate correctly without human answer supervision turned on.

If you are using analog trunks what you are describing is correct. 

Title: Re: Need help with DEE routing steps
Post by: k.parrent on May 23, 2016, 05:11:44 PM

I shortened the ring duration to 10 seconds with HAS set to off. The call rings my desk phone for the 10 seconds but it rings my cell until my cell phone vm picks up.

The trunks are analog so I guess that explains it. But I don't like it.