Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: lundah on March 10, 2016, 04:54:41 PM

Title: Shared line appearance across a cluster
Post by: lundah on March 10, 2016, 04:54:41 PM

I though I saw a comment in a thread recently on how to get a non-prime line on a set to ring for a line in another node in the cluster. Can't for the life of me find it now, and I have a need to do that on an MCD 6.0UR3 cluster.

What I mean is, the user at 1234 at site A is temporarily moving to set 5678 at site B. Rather than reprogram phones, or change the user to a HotDesk user, looking for a quick and dirty way to give 1234 a ringing appearance on 5678. I can't figure out how to do that.

Title: Re: Shared line appearance across a cluster
Post by: johnp on March 10, 2016, 05:53:19 PM

Remote ringing BLF/DSS key should work

Title: Re: Shared line appearance across a cluster
Post by: lundah on March 11, 2016, 08:17:24 AM

Quote from: johnp on March 10, 2016, 05:53:19 PM

Remote ringing BLF/DSS key should work

I tried that, can't get that to work. Got some detail on how to set it up? I tried just setting a DSS/BLF key of the remote DN on the phone, and setting the ring type to "ring". I'm obviously still missing something because that isn't working.

Title: Re: Shared line appearance across a cluster
Post by: sarond on March 11, 2016, 07:10:50 PM

Have a read throguh this thread http://mitelforums.com/forum/index.php?topic=6460.msg28980

Title: Re: Shared line appearance across a cluster
Post by: lundah on March 14, 2016, 12:07:16 PM

Didn't have the programming required in Remote Busy Lamps on the remote node. Got it working, thanks.