Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: twinturbo on March 03, 2016, 03:09:53 AM

Title: 3300CX Default Administrator and Passowrd.
Post by: twinturbo on March 03, 2016, 03:09:53 AM

I am awiting deliver of a 3300CX to use for some home experimentation.

is it correct that removing

/db/database/files/usrprfle.db

Via the console will reset the user database to default?

If so what is the default admin login?

Cheers

Rob

Title: Re: 3300CX Default Administrator and Passowrd.
Post by: sarond on March 03, 2016, 03:53:37 AM

This is going to depend on the version of Software.
Older versions required deleting the user profile db.
4.1 or 4.2 (can't remember which one) I beleive is not possible without Mitel Support
Later version can be reset by the 'ResetAllLoginPasswords' console command.

Default login is
system/password

Title: Re: 3300CX Default Administrator and Passowrd.
Post by: twinturbo on March 03, 2016, 02:40:13 PM

So if it's older than 4.1/4.2(??) then just delete the DB file.
If it's after 4.1/4.2 (??) just run the reset command.

So I am only realy stuck if it's he ?affected? version

Cheers

Rob

Title: Re: 3300CX Default Administrator and Passowrd.
Post by: sarond on March 03, 2016, 10:26:39 PM

Correct.

I'm not sure how stuck, it could all depend on how the system is licensed (online vs offline) and whether the SYSID is still assigned to an ARID (Application Record ID) in Mitels licensing servers.