Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: craigliu on April 16, 2010, 11:17:13 AM

Title: Help: how to set password
Post by: craigliu on April 16, 2010, 11:17:13 AM

We're using SX-200. I want to change password for an account say maint2. I logon with maint1 to SX200 ICP web console, then go to "Mantenance Commands" => "System" => "set" => "Password" => "Maint2" => enter new password => verify new password. Everything seems to be OK.

But when I logon with maint2 to SX200 ICP web console, I see error messages:

Alarm Status: Failed to retrieve system alarm.

1 - maintenance
2 - CDE
6 - Quit
Selecting an application: 2
Enter Username: maint2
Enter Password:
Authorization failure

It seems that the new password takes part role, but still no full function.(If password is wrong, I can not see this error message.) 

Did I do something wrong or I need do more settings after change password?(e.g. restart SX200, or something?). Please help me. Thanks.




 

Title: Re: Help: how to set password
Post by: craigliu on April 19, 2010, 06:51:09 PM

It's solved. It needs to cahnge password in both maintenance command => System => set and the form 28: access restriction.