Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: DialX on October 21, 2015, 02:39:09 PM

Title: mitel sends early connect signal, need to wait for response from far end
Post by: DialX on October 21, 2015, 02:39:09 PM

Hello we have a Mitel 3300 SIP trunk group that is giving us an early connect signal. We need to wait for the far end. Is there a setting(s) to ignore the early connect thus allowing the call progression.
Thanks
Steve

Title: Re: mitel sends early connect signal, need to wait for response from far end
Post by: lundah on October 21, 2015, 04:22:03 PM

There's a few SDP options you can mess around with in the SIP Peer Profile form, which one you need to mess with will depend on which RFC the other end works with.

Title: Re: mitel sends early connect signal, need to wait for response from far end
Post by: matthew on October 21, 2015, 06:12:49 PM

Dialx, see if this thread helps.

http://mitelforums.com/forum/index.php?topic=5508.0

Title: Re: mitel sends early connect signal, need to wait for response from far end
Post by: RogerV on October 24, 2015, 02:49:26 PM

What is your setup? MBG involved or just MCD. Also your bandwidth provider should have a Interlop Spec sheet. and if i may ask who is your Sip trunk provider?