Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: smithjordan875 on September 10, 2015, 08:52:12 PM

Title: IP helper
Post by: smithjordan875 on September 10, 2015, 08:52:12 PM

Hello,

If we are using IP helper (pointing to PBX DHCP) in the switch with VLAN 10, do we still need to program LLDP?

Thanks

Title: Re: IP helper
Post by: martyn on September 10, 2015, 08:59:25 PM

You don't program LLDP as such. LLDP works at Layer 2, where as an IP Helper is Layer 3.

You still need to have the voice vlan tagged on the switch port either way, so with a HP it is with the "voice" command on the vlan (along with tagged x-y), or cisco it's with the "switchport voice vlan x" command in each interface.