Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Rasritz on September 08, 2015, 01:38:17 AM

Title: Remote Teleworker
Post by: Rasritz on September 08, 2015, 01:38:17 AM

Hello,

I'm trying set up a remote teleworker handset to work within our office without toggling the nat/native setting.
I would like to leave it working in the office 95% of the time and use it remotely the other 5%.

Is this possible? 

Thanks

Rasritz

Title: Re: Remote Teleworker
Post by: acejavelin on September 08, 2015, 09:25:04 AM

Sure... get an older 8662 set and set it to Auto mode.  ;D

Otherwise this is dependent more on your router/firewall than the phone, essentially the phone needs to be able to go out and loop back in through the firewall, many routers do not allow this to occur, some do with no issues. The 53xx phones do not allow easy moving from local to remote and back. Could always buy a simple 5320 or 5330 set and setup Hot Desking, then anyone could take it and just log in with their extension.

Title: Re: Remote Teleworker
Post by: johnp on September 08, 2015, 07:22:26 PM

I think if you have a MBG and 5300 series you wouldn't need to make a change due to the proxy.