Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: dh_lab on March 31, 2010, 07:38:03 AM

Title: T1/E!
Post by: dh_lab on March 31, 2010, 07:38:03 AM

Any one tell me how i can check the T1/E1 card firmware and how can i load firmware to T1E1 card.



dh

Title: Re: T1/E!
Post by: bobcheese on March 31, 2010, 11:29:30 AM

if this is embedded card then as far as I am aware if you wanted to load new firmware you would need to FTP intot he 3300 and put the firmware into the correct directory. However, new firmware loads are normally contained in new software loads so the easiest thing to do would be upgrade the software.

With regards to checking versions you should be able to use the command 'firm PLID x x x' where x x x is the plid of the T1/E1

Title: Re: T1/E!
Post by: dh_lab on April 02, 2010, 08:04:36 AM

Below mentioned are the, thing it shows when i tried to check the firmware....

 Location     | Card Id | Rev  |  Firmware Version                             
------------------------------------------------------------------------------ 
 6  1  1      |         |      |                                               
------------------------------------------------------------------------------ 

is that mean system doesn't  know the card firmware or why it is not showing the details.




dhi