Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Gasmanz on August 20, 2015, 12:01:04 AM

Title: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: Gasmanz on August 20, 2015, 12:01:04 AM
We have a customer that has asked for some 5320 phones to have keys set up with DSS/BLF (Busy Lamp) for phones in an adjoining office. They wanted the keys to also be set with Ring Continuous so that if they are away from their desks they will hear that the remote phones are ringing.

With this scenario is there any setting that will temporarily disable the DSS/BLF Ring Continuous if they are already on a call?
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: ralph on August 20, 2015, 08:32:00 AM
No.

Another downside to using Ring Cont is that if the user is on the speaker phone when a line begins to ring, it will cut out all audio until the call stops ringing.

Ralph
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: matthew on August 20, 2015, 11:30:00 PM
I may be missing something but Ring Continuous specifically rings when you are busy on a call. Is there a reason you can't just use Ring?
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: Gasmanz on August 24, 2015, 11:07:09 PM
The Ring option only gives you 1 quick half ring indication that the remote extension is being called. Which has a high probability of not being noticed if you are not sitting at your desk for the 1 second of ringing.  :(

What would be really good would be Ring or No Ring if you are on a call and Continuous Ring when you are not on calls.
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: matthew on August 25, 2015, 06:23:22 PM
From Help:
Quote
Ring causes your telephone to ring immediately and continuously. If a non-prime line is set to "Ring", it will only ring once when you are busy on your prime line.

Isn't this what you are asking for?
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: Gasmanz on August 26, 2015, 01:23:09 AM
@Matthew - Not sure where you are getting this information. We are talking about a DSS/BLF key to monitor the ringing of another phone in the office and not an additional line/extension on the same phone.

Mitel state "Selecting Ring will cause the set hosting the busy lamp to issue a single burst of ringing when the lamp first indicates ringing state."
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: matthew on August 26, 2015, 06:53:17 PM
Aha. I see where the confusion on my part stems from. I followed the help from the Multiline Set Keys form into Line Appearance Ring Types.

In that case, if the extensions concerned aren't using VM, you might be able to set up a Call Forward No Answer to a multicall key with Ring set.
Title: Re: DSS/BLF Key with Ring Continuous but only if you aren't on a call
Post by: Gasmanz on August 26, 2015, 08:02:38 PM
No problem. Your idea won't work in my case. Thanks anyway.