Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: irongladiator on July 09, 2015, 07:25:00 PM

Title: One Touch Button
Post by: irongladiator on July 09, 2015, 07:25:00 PM

Hello Fellow Mitel Techs,
I was curious if there was a way to program a key on a Mitel 5330e IP Phone that lets a user simply press one button which calls and waits then enters an access code? (Wants to use it for a Conference Bridge) 1-800-xxx-xxxx <Pause> Then access code? Like this: 91800xxxxxxx,,,1234#

Thanks,
-Iron

Title: Re: One Touch Button
Post by: bluewhite4 on July 09, 2015, 07:49:29 PM

You can put P for pause or F for flash within user speedcalls, so you should be able to do multiple P's.

Title: Re: One Touch Button
Post by: irongladiator on July 10, 2015, 02:03:07 AM

Quote from: bluewhite4 on July 09, 2015, 07:49:29 PM

You can put P for pause or F for flash within user speedcalls, so you should be able to do multiple P's.

Thanks bluewhite4,
Do we know how long a "P" is? 2 seconds 4 seconds, etc.

Thanks,
-Matt W.

Title: Re: One Touch Button
Post by: johnp on July 10, 2015, 08:02:50 AM

It length is set in system options I believe

Title: Re: One Touch Button
Post by: sarond on July 10, 2015, 09:08:28 AM

As John says it can be changed in the System Option, default is 3 seconds.

Title: Re: One Touch Button
Post by: irongladiator on July 10, 2015, 01:38:00 PM

Quote from: sarond on July 10, 2015, 09:08:28 AM

As John says it can be changed in the System Option, default is 3 seconds.

johnp & sarond,
Works like a champ. Thanks a bunch!  :)

Thanks,
-Iron