Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: hugh on May 26, 2015, 09:30:02 PM

Title: E1 DID number with the number following the issue
Post by: hugh on May 26, 2015, 09:30:02 PM

Hello everyone!
 Recently, a question!
 I have a MXEII3300 6.0 SP3,there are four E1 DID.
 When a customer uses the function code Call Forwarding external,
 But the receiver can only bring out the company representative number!
 Q:
 How to modify a Call Forwarding external number, DID extension number of the receiving        end to see!
Thanks for your help !!

Title: Re: E1 DID number with the number following the issue
Post by: johnp on May 27, 2015, 10:01:02 PM

Check ISDN protocol for Replace External CLID value

Title: Re: E1 DID number with the number following the issue
Post by: hugh on June 01, 2015, 12:10:35 AM

Thanks for your help !!