Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: darrel on April 23, 2015, 12:20:47 PM

Title: Setting up Cisco SPA 504G IP phones on Mitel 5000
Post by: darrel on April 23, 2015, 12:20:47 PM
Have a customer with Cisco SPA 504G IP phones that they want to put on a Mitel 5000. They would all be at one remote location. Any idea if this would work and if so how clean it would be.
Title: Re: Setting up Cisco SPA 504G IP phones on Mitel 5000
Post by: Tech Electronics on April 23, 2015, 03:43:23 PM
Darrel,

It would obviously only work in SIP mode so you would need a SIP license on the 5000 and they would need to have a Public IP address for the Base Server NIC and a different one the PEC-1 NIC [if they have one]. Then they would just need to setup a firewall rule that open up port 5060 from that Public IP Address to the LAN IP Address(es) of the 5000.

Now, it will not have the same feature set that it would if it were connected to a Cisco Phone System as we do not necessarily support all of the same SIP features as the Cisco SPA 504G can support with the Cisco Phone System.

Thanks,

TE
Title: Re: Setting up Cisco SPA 504G IP phones on Mitel 5000
Post by: darrel on April 23, 2015, 10:19:33 PM
Thanks
I thought it should work without an issue as long as the Cisco can be a generic SIP phone